Natural Chemistry Pool PHOSfree

Our Natural Chemistry PHOSfreereduces phosphate levels in your pool for Clear, Perfect Algae-Free Water!

• 1 count package
• Available in 2 sizes: 67.7 oz. or 101.5 oz.
• Reducesphosphates to near zero for an algae free pool
• Less filter maintenance
• Less vacuuming and cleaning
• Reduced pool maintenance
• Enhances any sanitizer program
• Non-toxic and no phosphate build-up
• 100% safe for your family and the environment

Directions for use:

This product is designed for use in properly balanced pool water.

1. Clean or backwash filter.
2. Determine appropriate dose. * See chart below.
3. Shake bottle well prior to application. With circulation pump running, add dose to skimmer.
4. Run filter for 48 hours continuously without backwashing or cleaning.
5. After 48 hours of filtering, clean/backwash filter. Retest phosphate levels, and if necessary, repeat steps 1-5.

Note: If DE filter pressure rises to 10psi above start-up pressure, turn pump off for 1 minute and then turn it back on. If pressure remains high, backwash or rinse for 30 seconds.

Dosage Chart

Dose per 10,000 gallons (38,000L)

For DE & Cartridge Filters: Do not add more than 1.5L (48oz) at a time. If more than 1.5L (48oz) is needed to treat, be sure to clean or backwash the filter between treatments.

IMPORTANT: Algae must be treated prior to testing and lowering phosphates. Chlorine must be under 5ppm before testing phosphates.

This product is considered a “hazardous material,” is air-restricted and cannot be shipped to Alaska or Hawaii.

All Chemical sales are final.